Quality and documentation
A reference standard is only as useful as the paperwork that travels with it. This is what accompanies every lot CATO ships, and what to check before you release it into your system.
Certificate of analysis
Each lot is issued with its own certificate of analysis. The certificate identifies the lot, the catalogue number, the CAS number and the analytical method used for that lot, and states the value assigned to the material together with the basis for that assignment. Certificates are retrieved by lot number, so the document you file corresponds to the vial in your hand rather than to the product in general.
- Certificate of analysis lookup — enter the catalogue number to retrieve the certificate and safety data sheet.
- Certificates and safety data sheets can also be requested by email at chao.lu@cato-chem.com.
Identity, purity and content
Impurity and metabolite standards are not commodities: two lots of the same catalogue number can differ in the value that should be used in a calculation. The certificate therefore reports the quantity that was measured and how it was measured, so that a laboratory can decide whether the material is fit for its intended use — for example as a system suitability check, as a quantification standard, or as an identification standard.
Typical purity published on the product page
For 252 of the catalogue items CATO states the typical purity or assay measured on a released lot directly on the product page, together with the analytical method used. It is the same figure that appears on that lot’s certificate of analysis. Publishing it means you can screen a standard against your acceptance criteria before you enquire, instead of requesting a certificate first and waiting for a reply.
- N-Nitrosodimethylamine-d6 (CAS 17829-05-9) — 99.5% by GC, typical assay 98.4%
- (All-Z)-8,11,14,17-Eicosatetraenoic Acid Ethyl Ester (CAS 123940-93-2) — 96.9% by GC, typical assay 96.5%
- Cyanocobalamin EP Impurity E (8-epi-cyanocobalamin) (CAS 41325-63-7) — 99.37% by HPLC, typical assay 98.6%
- Stearidonic Acid Ethyl Ester (CAS 119798-44-6) — 99.2% by GC, typical assay 98.2%
- Mupirocin EP Impurity A (CAS 40980-51-6) — 96.35% by HPLC, typical assay 92.6%
- Glycyrrhizic Acid Impurity 17 (CAS 2919137-39-4) — 97.357% by HPLC
- Aflatoxin B1 (CAS 1162-65-8) — 99.4% by UPLC
- Azithromycin EP Impurity C (CAS 620169-47-3) — 96.92% by HPLC, typical assay 95.5%
- Azithromycin EP Impurity D (CAS 612069-26-8) — 95.861% by HPLC, typical assay 91.9%
- Azithromycin EP Impurity O (CAS 763924-54-5) — 91.7% by HPLC, typical assay 90.8%
- Ochratoxin A (CAS 303-47-9) — 99.3% by HPLC
- ethyl(5E,8Z,11Z,14Z,17Z)-icosa-5,8,11,14,17-pentaenoate (CAS 125827-50-1) — 98.4% by GC, typical assay 97.7%
- ethyl (5Z,8E,11Z,14Z,17Z)-icosa-5,8,11,14,17-pentaenoate (CAS 125827-49-8) — 98.1% by GC, typical assay 97%
- Deoxynivalenol (CAS 51481-10-8) — 99.6% by HPLC
- Finasteride EP Impurity B (CAS 103335-41-7) — 98.4% by HPLC, typical assay 96.5%
- ethyl (5Z,8Z,11Z,14Z,17E)-icosa-5,8,11,14,17-pentaenoate (CAS 125827-48-7) — 92.228% by GC, typical assay 91.2%
A typical value describes the product as released and is not itself a certificate. The certificate issued for the lot shipped with your order states the value assigned to that lot, and is the document your quality system should file.
Safety data sheets and transport
A safety data sheet is supplied for each catalogue item, and shipping conditions are set for the compound rather than for the catalogue as a whole. Items requiring cold shipment are packed and documented accordingly, and the SDS supports the transport classification for the shipment.
Storage and handling
Storage conditions are stated on the product page and on the certificate. Where a compound is moisture-, light- or temperature-sensitive, that is reflected in the recommended condition and in the shipping configuration rather than left to the receiving laboratory to discover.
Standards and accreditation
CATO operates a quality management system covering the production and certification of reference materials. Reference material production is accredited to ISO 17034 (competence of reference material producers) through both CNAS (China National Accreditation Service) and ANAB (ANSI National Accreditation Board, USA), and the quality management system is certified to ISO 9001:2015 by SGS. Certificates of registration, the accreditation scopes and the validity dates are available on request — the scope statement, not the certificate number alone, is what confirms that a particular activity is covered. The company's corporate site, en.cato-chem.com, carries its own quality documentation.
Custom synthesis and structural confirmation
Compounds that are not in the catalogue can be quoted for custom synthesis or isolation, including labelled analogues. Send the structure or the parent drug CAS number together with the quantity and the required date, and the feasibility of the route will be confirmed in the written reply.